The use of laser cutting machine technology
Using laser engraving cutting machine for cutting, process is very simple, like to use a computer and printer to print on paper.You can in Win98 / Win2000 WinXP environment using a variety of graphics software, such as CorelDraw design, scan graphics, vector graphics and a variety of CAD file can be easily "print" to the engraving machine.The only difference is, printer toner besmear to paper, the laser engraving laser beam to wood products, arc, plastic, metal, stone and so on almost all of the above material.
Laser engraving cutting machine can be divided by carving a different way lattice carved and vector cutting: bitmap bitmap carving carving resembling a high-resolution lattice printing.Laser head swinging, each carved out a line composed of a series of points, and then the laser carving out more line to move up and down at the same time, the last constitute a full-page image or text.Scanning of graphics, text and graphic can use lattice vector quantization.Vector cutting and lattice carved, vector cutting is the outer contour line in the graphic.We usually use this mode in the wood, ark, penetration on materials such as paper cutting, can also be used in a variety of material surface for marking operation.A carving machine performance, mainly by carving speed, intensity and spot size. Carving carving speed refers to the speed of laser head movement, usually from rice/seconds, high speed with high production efficiency.
Speed is also used to control the depth of cut, for a specific laser intensity, the slower speed, laser engraving cutting machine cutting or engraving depth is greater.You can use engraving machine panel to adjust speed, also can use computer print driver to adjust.In the range of 1% to 100%, the adjustment range is 1%.Carving strength carving strength refers to come in on the strength of the material surface laser.For a particular sculpture speed, strength, the greater the cutting or engraving depth is greater.You can use engraving machine panel to adjust intensity, also can use computer print driver to adjust.In the range of 1% to 100%, the adjustment range is 1%.The greater the intensity, the greater the equivalent velocity also.Cutting depth and the deeper the spot size of beam spot size can use different focal length of lens.The sculpture of light lens used in high resolution.
Large spot lens used for low resolution carving, but for vector cutting, it is the best choice.New equipment standard lens is 2.0 inches.The spot size in the middle, is suitable for various occasions.General engraving machine carved the following materials: wood, organic glass, metal, glass, stone, crystal, corian, paper, double color boards, alumina, leather, resin, plastic metal.