A few notes on how cutting machine maintenance
1, water replacement and tank cleaning
Note: the machine work before must ensure that the laser tube is full of circulating water.
Circulating water quality and water temperature directly affects the service life of laser tube, it is recommended to use pure water, and to control the water temperature below 35 ℃.For more than 35 ℃ to replace the circulating water, or to add ice to reduce the water temperature, water (cooling machine, suggest the user to select or use two tank).
Clean water tank: first, turn the power off and remove water inlet pipe, let the laser tube of water into the tank automatically, open the water tank, pump and clear the dirt on the water pump.Good clean water tank clean, replace the circulating water, the water pump to restore back into the water tank, the connection pipe inserted into the inlet of the pump, tidy up the joint.The pump power alone, and run 2 to 3 minutes (the laser tube is full of circulating water).- dongguan laser cutting machine
2, cleaning of the fan
Fan for a long time use, can make the fan inside the accumulation of a lot of solid dust, let the fan make a big noise, in addition to flavor and is unfavorable to the exhaust.When appear insufficient suction fan smoke not free, turn off the power supply first, will be discharged into the duct and the duct on the fan, remove the inside of the dust, and then put the fan on, and pull out the inside of the blades, until clean, then put the fan installed.
3, guide the clean
Guide rail, straight axis, as one of the core parts of the equipment, it is the function of guidance and supporting role.In order to ensure the machine has high machining accuracy, to guide, linear has higher guidance precision and good running smoothness.Equipment in the process of running, because of the work piece in processing will produce a large number of corrosive dust and smoke, the smoke and dust deposit on the guide rail, straight axis surface, a large amount for a long time has a great influence on the equipment of machining accuracy, and in the guide rail straight axis surface erosion, shorten the service life of the equipment.In order to let the machine to normal and stable work, ensure that the quality of processed products, guide rail, straight axis carefully conduct routine maintenance.
4, fastening screws, coupling
Motor system in the work after a period of time, movement joint creates a loose screw, coupling, will influence the mechanical movement smoothness, so to watch the driving part of the running of the machine have any sound or abnormal phenomenon, found that the problem has to be strong in a timely manner and maintain.At the same time, the machine should be for a period of time using tools solid screw one by one.First solid should be used in the device after a month or so.